Sheetrock Estimator for Florida Projects
Figure out how many sheets you need and what gypsum board will cost — standard, fire-rated, or moisture-resistant — with current 2026 Florida material pricing delivered in 24–48 hours.
What This Sheetrock Estimate Covers
SHEETROCK is a registered trademark of USG Corporation. Estimate Florida Consulting is an independent estimating service and is not affiliated with, endorsed by, or sponsored by USG Corporation. This page provides gypsum wallboard (drywall) material cost estimates for comparison purposes, based on your room dimensions and board type.
This estimator focuses on the material side of the job: how many 4x8 sheets you need for your room and what they'll cost by type — standard 1/2" board, fire-rated Type X, or moisture-resistant board for bathrooms and laundry rooms. For installed labor pricing by finish level, see our drywall job estimator, which breaks down Level 4 and Level 5 finish installed pricing per square foot.
2026 market pricing shows standard 4x8 sheets of half-inch gypsum board running $12-$21 per sheet at most supply houses, with fire-rated Type X board adding $4-$8 per sheet over standard pricing, and moisture-resistant board running $20-$35 per sheet depending on brand and thickness. Bulk orders of 34 panels or more typically qualify for a 10-25% discount.
How Many Sheets Do You Need?
A standard 4x8 sheet covers 32 square feet. To estimate sheet count, measure your total wall and ceiling square footage, divide by 32, and add 10-15% for waste and cuts around doors, windows, and corners. Our calculator below handles this math automatically based on your room dimensions.
Standard 1/2" Board
Common gypsum board for standard interior walls and ceilings.
Fire-Rated Type X
5/8" fire-rated board required in many garage, commercial, and fire-separation walls.
Moisture-Resistant Board
Green or purple board for bathrooms, laundry rooms, and high-humidity areas.
Bulk Order Pricing
Discounted per-sheet pricing for orders of 34 panels or more.
2026 Florida Sheetrock Material Costs
Typical 2026 Florida market rates for gypsum board material, per 4x8 sheet.
| Sheetrock / Drywall Type | Typical Florida Cost (2026, per 4x8 sheet) |
|---|---|
| Standard 1/2" board | $12 – $21 / sheet |
| Fire-rated Type X (5/8") | +$4 – $8 over standard |
| Moisture-resistant board | $20 – $35 / sheet |
| Cost per square foot (material only) | $0.30 – $0.50 / SF |
| Bulk order discount (34+ sheets) | 10% – 25% off |
| Joint compound (per 5-gallon bucket) | $15 – $25 |
| Drywall tape (per 250 ft roll) | $5 – $10 |
What Affects Your Sheetrock Cost in Florida
Board Type
Standard board costs the least; fire-rated Type X and moisture-resistant board cost more per sheet.
Sheet Thickness
5/8" board costs more than 1/2" board and is often required for fire-rated assemblies.
Total Square Footage
Larger rooms and whole-home projects require more sheets, though per-sheet pricing may improve with bulk ordering.
Waste Factor
Complex room shapes with more corners, doors, and windows increase waste and total sheets needed.
Delivery vs. Pickup
Delivered sheetrock typically costs more than picking up material yourself from a supply house.
Bulk Discounts
Orders of 34 sheets or more often qualify for meaningful per-sheet discounts.
Brand & Supplier
Pricing varies between big-box retailers and specialty building material suppliers.
Regional Availability
Material pricing can shift with supply chain conditions and regional demand, particularly after hurricane season.
Sheetrock Sheet Count Calculator
Estimate how many sheets you need and the material cost based on your room's square footage.
Estimated Florida market range for sheetrock estimator
Get an Exact Quote →Florida Building Code, Climate & Permitting
Humidity & Moisture-Resistant Board
Florida's humidity makes moisture-resistant board a smart upgrade well beyond just bathrooms and laundry rooms.
Hurricane Season Supply Timing
Material pricing and availability can tighten after hurricane season due to regional rebuilding demand.
Garage Fire Separation Requirements
Florida building code typically requires fire-rated Type X board on garage walls shared with living space.
Mold-Resistant Considerations
Homes with prior moisture intrusion may benefit from mold-resistant board formulations in affected areas.
How We Deliver Your Estimate
Share Your Room Dimensions
Tell us your square footage and whether you need standard, fire-rated, or moisture-resistant board.
Sheet Count Review
We calculate sheet count including a standard waste factor for your room layout.
Material Cost Takeoff
We price sheets, joint compound, and tape at current Florida supply house rates.
Delivery & Support
You receive a detailed material cost breakdown within 24–48 hours.
Frequently Asked Questions
Standard 4x8 sheets of half-inch gypsum board run $12-$21 per sheet, with fire-rated Type X adding $4-$8 more and moisture-resistant board running $20-$35 per sheet.
Measure your total wall and ceiling square footage, divide by 32 (the coverage of one 4x8 sheet), and add 10-15% for waste around doors, windows, and corners.
SHEETROCK is a specific brand name (a registered trademark of USG Corporation) for gypsum wallboard; "drywall" is the generic term for the same category of product.
This estimator focuses on material cost and sheet count; see our drywall job estimator for installed labor pricing by finish level.
Yes, moisture-resistant board is strongly recommended for Florida bathrooms and laundry rooms given the state's humidity levels.
Yes, orders of 34 sheets or more typically qualify for a 10-25% discount depending on the supplier and board type.
Request Your Free Estimate
Upload your plans and get a detailed, line-item sheetrock estimator estimate in 24–48 hours.
Turnaround
Most sheetrock estimator estimates are delivered within 24–48 hours of receiving your plans.
What to Include
Plans, spec sheets, or scope description. No plans yet? We can still ballpark from a description.
What You Receive
A detailed, CSI MasterFormat line-item breakdown ready for bidding or budgeting.
Email Us
Ready for an Accurate Sheetrock Estimator?
Serving all 67 Florida counties — 24–48 hour turnaround.
Request Your Free Estimate